Wood science is the study of wood as a material that is renewable and of biological origin. In other words, the term wood science can also be known as wood technology. To be able to study wood it has to be compared to other products. Materials properties, ease of it being worked on and its value are among the few properties which are compared against those of wood and other materials. The many Merits of timber and these technologies improve wood to be superior over other products. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. Wood is renewable, and this makes it more precious. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.
Protection of wooden structure and products is a must if you want to keep the good looks in place. Wooden structures have to be kept away from water and pests that eat through the wood. The water particles in the timber increase the rotting and the insects bore through the wood. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. As the name implies the preservative is made of copper products. There are a few disadvantages of this method as a mode of wood preservation. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The concentration of the chemical that will be used to treat a piece of wood will depend on the where it is going to be used and the molecular structure of the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.
The use of copper metal is another method of wood treatment that is fast being accepted. The use of this method is fast being accepted because it is not corroding the metal fasteners. Micronized copper wood preservative is the correct term to refer this type of preservation. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. This process is highly effective and the wood properties and heightened. The time the wood products treated using this method last is longer other types of treatment.
Termites cannot eat through timber treated through this method. Unlike other methods of treatment this method is not corrosive. The wood treated using this method last longer and is stronger.